What Is an Axel Jump in Figure Skating?
The Axel explained: forward outside take-off, back outside landing, why a single has 1.5 turns, where the name comes from and how skaters build up to it.
On this page7 sections
An Axel is the figure skating jump that takes off forwards from an outside edge and lands backwards on the outside edge of the other foot. Because it starts forwards and finishes backwards, every Axel has an extra half rotation: a single Axel is 1.5 turns in the air, a double 2.5, a triple 3.5 and a quad 4.5. It is the only one of the six standard jumps with a forward take-off, which is why it is the easiest jump to recognise and widely considered the hardest.
How does an Axel take off and land?
A skater usually approaches on a backward edge, steps forwards onto the left forward outside edge (for a skater who rotates anticlockwise), swings the free leg through and jumps up off that edge. In the air the skater pulls into a tight rotating position, then lands on the right back outside edge with the free leg extended behind.
The Wikipedia summary of the Axel jump describes the same edges: forward outside take-off and back outside landing on the opposite foot. Clockwise rotators mirror everything, taking off from the right foot and landing on the left.
If the edges are new to you, read the guide to inside and outside edges first. The Axel depends on holding a clean outside edge on both the take-off and the landing.
Why is a single Axel 1.5 rotations?
Every other standard jump (Salchow, toe loop, loop, flip and Lutz) takes off backwards and lands backwards, so a single is one full turn. The Axel takes off facing forwards and lands facing backwards, so it needs an extra half turn to finish in the landing direction.
| Jump | Rotations in the air |
|---|---|
| Single Axel | 1.5 |
| Double Axel | 2.5 |
| Triple Axel | 3.5 |
| Quadruple Axel | 4.5 |
That extra half turn is why the Axel is treated as the hardest jump of each rotation level, and why a triple Axel is in many ways closer to a quad than to other triples.
Where does the name come from?
The jump is named after Axel Paulsen, a Norwegian skater who first performed it at an international skating competition in Vienna in 1882, according to his Wikipedia biography. He jumped it on speed skates rather than figure skates.
Later milestones followed as skaters added rotations. Dick Button landed the first double Axel at the 1948 Winter Olympics, Vern Taylor the first triple at the 1978 World Championships, and Midori Ito became the first woman to land a triple Axel in international competition in 1988. On 14 September 2022, Ilia Malinin landed the first quadruple Axel in competition, recognised by the International Skating Union and Guinness World Records.
How do skaters build up to a single Axel?
There is no shortcut. Skaters normally reach the single Axel after solid edges, three-turns and the first jumps. A typical path looks like this:
- Forward and backward outside edges on both feet, held under control.
- Three-turns, which teach turning from forwards to backwards on one edge. See how to learn three-turns.
- The waltz jump, a half-rotation jump from a forward outside edge to a back outside landing. It is effectively a half Axel, so the take-off and landing positions carry straight over.
- Single jumps such as the Salchow and toe loop, which build a reliable rotating position and landing.
- Axel drills chosen by your instructor, such as waltz jump and back-spin combinations, before attempting the full single Axel.
Many skaters spend a long time on step five. The Axel has a reputation for taking longer than any other single jump, and that is normal.
What are common Axel mistakes?
- Jumping off the toe pick. The take-off is from the edge; tipping onto the pick shortens the jump and pitches the skater forwards.
- Swinging the arms too early. Rotating before leaving the ice skids the take-off edge and costs height.
- Leaning back on take-off. Sitting back stops the body travelling up and over the take-off leg.
- Under-rotating the landing. Landing short of the full turn puts weight on the toe pick and often causes a fall.
Warning
Do not try an Axel from a written description. Learn it with a qualified instructor, on clear ice, after you can land a waltz jump and single jumps consistently.
Is an Axel the same as a waltz jump?
No. The waltz jump uses the same forward outside take-off and back outside landing but turns only half a rotation. It is the usual first jump and the foundation for the Axel. For how jumps fit into the wider sequence of skills, see figure skating levels from beginner skills to first jumps and the figure skating skills list in order.
Key takeaways
- An Axel takes off forwards from an outside edge and lands backwards on the other foot's outside edge.
- The forward take-off adds half a turn: single 1.5, double 2.5, triple 3.5, quad 4.5.
- It is named after Axel Paulsen, who first performed it in Vienna in 1882.
- Skaters reach the single Axel through edges, three-turns, the waltz jump and single jumps, with an instructor.